Nightscout Foundation

Tandem Mobi Open Beta

← Back to overview

Last updated: November 16, 2026

For experienced Trioneers, Loopers, and AndroidAPS users, this page contains information specific to the Tandem Mobi open beta.

This work was only possible through the amazing work of our open-source community of developers supported by the Nightscout Foundation — a nonprofit focused on empowering development to improve the lives of those with Type 1 diabetes. Your support can help make effective systems for Type 1 diabetes available to everyone regardless of what devices they use.

Before you begin

The open beta is intended for experienced Trio, Loop, or AndroidAPS users who are comfortable following custom build instructions. Tandem Mobi support is still being tested and is not yet recommended for everyone.

Known Limitations

  1. The Tandem Mobi pump will either vibrate or beep every 5 minutes when using Trio, Loop, or AndroidAPS. This is a hard technical limitation due to the current behavior of the pump which open-source developers cannot bypass at this time. The pump either makes an audible beep or a vibration (which you choose is user-configurable) in response to every Temp Basal, Bolus, or other insulin-delivery command. During testing, some users found the vibration motor to be more audible than the beep, which can be partially muffled through clothing and device placement. We are hopeful that a future pump software release will give users the ability to turn this off.
  2. This is not 100% stable software. It is possible that something might not work when you first switch to Tandem Mobi. You can always switch back to the Tandem Mobi app and use Control-IQ.

Key terms

OS-AID — open-source automated insulin delivery system. Trio and Loop are OS-AID apps for iPhones, while AndroidAPS is for Android phones.

Browser Build — a way to build and keep Trio or Loop updated using GitHub Actions in a web browser, without needing a Mac.

Tandem Mobi — a small tubed insulin pump from Tandem Diabetes Care that is controlled from a phone app. It has Bluetooth built in, so no link device is required with OS-AID.

Control-IQ — Tandem’s own automated insulin delivery feature, built into the pump.

TandemKit — the open-source Trio/Loop driver that lets the app talk to a Tandem Mobi.

Frequently asked questions

Technical & compatibility questions

Can I update my Trio or Loop app right now to be able to use a Tandem Mobi?

Please only update if you meet the open beta testing criteria and are comfortable running and troubleshooting Trio or Loop.

Can I update my AndroidAPS app right now to be able to use Tandem Mobi?

Please only update if you meet the open beta testing criteria and are comfortable running and troubleshooting AndroidAPS. To set up the open beta, follow the AAPS Tandem Testing documentation.

Can I use the t:slim X2 pump with the open beta?

Unfortunately, the t:slim X2 device cannot be used safely with open-source automated insulin delivery systems because you can only bolus, but cannot control basal delivery or suspend/resume insulin over Bluetooth. This is a hard technical blocker for the t:slim X2 which is not present on the Tandem Mobi.

Which Mobi firmware versions are supported? Should I update my pump’s firmware?

All known Tandem Mobi firmware versions are compatible.

Which iPhones, iOS versions, or Android phones have you tested Tandem Mobi with?

Tandem Mobi has been tested with various iPhone and Android models and there are no phone-specific quirks known at this time.

What happens to Control-IQ when I use my Mobi with Trio, Loop, or AndroidAPS?

Control-IQ is disabled when using Trio, Loop, or AndroidAPS. The phone acts as the insulin delivery controller, and performs the closed-loop in place of the pump itself.

Can I keep using the Tandem Mobi app at the same time?

You must un-pair your Mobi from the Tandem Mobi app to use it with Trio, Loop, or AndroidAPS. You can switch back to the official Tandem Mobi app at any time, by un-pairing and re-pairing.

Can you perform a quick bolus/easy bolus using the pump button?

Yes - you can bolus from the pump using the official Tandem Quick Bolus functionality just like when using Control-IQ.

Do I need to keep my phone nearby?

Yes. You need your phone nearby at all times. Your phone is running the OS-AID application, just as it would with any other pump.

Will my data go into Tandem Source if I use my Mobi with OS-AID?

Tandem Source upload is not supported. Please use Nightscout or Tidepool instead.

I have an Android phone. Can I put Trio or Loop on it and use my Mobi that way?

No. Trio and Loop are for iOS (iPhone) only. Tandem Mobi support is available in the AndroidAPS open beta; see For current AAPS users below.

Using Tandem Mobi

What should I do if my phone breaks or I need to stop using Trio or Loop?

You can switch back to the Control-IQ algorithm by using the official Tandem Mobi app at any time, so long as you have a pump charger available to complete the pairing process.

How do I un-pair or re-pair the Tandem Mobi?

Re-pairing the Mobi requires a wireless charger. Any Qi-compatible wireless charger works; you do not need the official Tandem charging pad. MagSafe chargers also work, but avoid bringing the pump’s cartridge area into contact with the magnets, which could damage the piston. During the beta, keep a wireless charger available at all times in case you need to re-pair, switch back to the official Tandem Mobi app, or switch phones.

Only one app can be connected to the pump at a time. Pairing is started from the app you want to use; see TrioDocs, LoopDocs, or the AAPS Tandem Testing documentation for the steps in each app. On the pump itself, pairing works like this:

  1. Place the Mobi on the charger and wait for the white lights to pulse, showing that it has started charging. If red lights are blinking, an alert is active; wait until they stop before continuing.
  2. Pick the Mobi up off the charger and wait 2–3 seconds.
  3. Press the pump button twice to enter pairing mode: press for about a quarter of a second, release, wait half a second, then press again. Do this slowly. The pump vibrates and beeps twice once it is in pairing mode.

Pairing is not designed to be done often and can be temperamental, so it may take several tries.

For current Trio and Loop users

I use Browser Build. Can I update my Trio or Loop app right now to be able to use a Tandem Mobi?

Update your app using Browser Build — during the open beta, Tandem Mobi support is available in the feat/tandem branch of Trio and the feat/tandem-next-dev branch of Loop. For Trio, follow the TrioDocs guide to build the feat/tandem feature branch with Browser Build. For Loop, follow the LoopDocs guide to build a development branch with Browser Build, using the feat/tandem-next-dev branch.

I use Xcode build. How do I update my Trio or Loop app to be able to use a Tandem Mobi?

During the open beta, Tandem Mobi support is available in the feat/tandem branch of Trio and the feat/tandem-next-dev branch of Loop. For Trio, follow the TrioDocs guide to build the feat/tandem feature branch on a Mac. For Loop, follow the LoopDocs guide to build a development branch on a Mac, using the feat/tandem-next-dev branch.

How did support for Tandem Mobi happen? What can I do to help?

Trio, Loop, and AndroidAPS are projects built and maintained entirely by volunteers, and they will always be free to use. Adding support for Tandem Mobi represents years of volunteer work by open-source developers, supported through the Nightscout Foundation. If these systems have helped you and you’d like to help support the community, the Nightscout Foundation is a nonprofit focused on empowering development to improve the lives of those with Type 1 diabetes and would be grateful for your support.

Can I pay someone to build Trio or Loop for me? It sounds complicated.

You’ll need to build it yourself. But building it yourself does not mean building it alone. Here are some Facebook groups you can join:

Volunteers are always willing to help.

For current AAPS users

How does the Tandem Mobi open beta affect Android users or AndroidAPS?

Tandem Mobi support is available in the AndroidAPS open beta. This is beta software, so review the AAPS Tandem Testing documentation and make sure you understand the risks before using it.

For open beta information and updates, monitor the AAPS Users Facebook group or the WeAreNotWaiting/AndroidAPS Discord.

I use AndroidAPS. How do I join the Tandem Mobi open beta?

For current Tandem Mobi users

I’m a Tandem Mobi user and I’ve never considered open-source diabetes tech before. How do I get started with OS-AID?

If you have never used Trio, Loop, or AndroidAPS before, please do not participate in the open beta test, and wait until Tandem Mobi support is fully released.

Help keep this work going

Tandem Mobi support in Trio and Loop represents years of volunteer work by open-source developers, supported through the Nightscout Foundation. If these systems have helped you, your support helps make effective systems for Type 1 diabetes available to everyone, regardless of what devices they use.

Setup instructions

Getting started — important onboarding info

For experienced iOS open-source AID system users, TrioDocs and LoopDocs have been updated with details about the Tandem Mobi Open Beta. For experienced AndroidAPS users, see the AAPS Tandem Testing documentation.

Setup for current Trio, Loop, or AndroidAPS users

For experienced users willing to run beta-quality software, you can set up the Tandem Mobi open beta by following the instructions on TrioDocs, LoopDocs, or the AAPS Tandem Testing documentation:

How to get support during the beta

During the open beta, if you experience any issues please use the built-in problem reporting feature in Trio and Loop, available in ‘Settings’ > ‘Report a Problem’ > ‘Send to the development team’; or ask in the #t_mobi-test channel in the AndroidAPS WeAreNotWaiting Discord.

If you have questions or need help during the open beta, please see the following on how to get support:

  1. First, check the Q&A section on this page to see if it answers your question. We have prepared answers to what we expect will be the most common questions, so reading above (or searching this page with Ctrl-F/Command-F) will save both you and our volunteers time :)
  2. If you need help with Trio:
    1. Check the Trio Tandem Mobi-specific documentation.
    2. Reach out in the Trio: OS-AID Diabetes App Support group, or another local support group.
    3. For more technical questions, you can contact the Trio developers in Discord.
  3. If you need help with Loop:
    1. Check the Loop Tandem Mobi-specific documentation.
    2. Reach out in the Loop and Learn Facebook group, Looped Facebook group, or another local support group.
    3. For more technical questions, you can contact the Loop developers in Zulipchat.
  4. If you need help with AndroidAPS:
    1. Check the AAPS Tandem Testing documentation.
    2. Reach out in the AAPS Users Facebook group.
    3. For more technical questions, you can contact the WeAreNotWaiting/AndroidAPS Discord.